Dene Survey Solutions

Indigenous-owned · Alberta

Drone mapping, survey and drafting you can open on your phone.

We turn drone flights, GNSS survey and existing surfaces into cut/fill volumes, Civil 3D drawings and a SiteViewer link the whole project team can use, in the office or on site. No app, no login.

Live demo: about 10 MB · best on Wi-Fi

New: AR site view. See the design on the ground through your phone camera.

From the open-data ring road demo below

  • 2.38 M m³cut, measured from open LiDAR
  • 3.95 M m³fill, same viewer, same numbers
  • 183 haof ground changed, 2015 → 2020
3D view of the south-west Calgary ring road at the Elbow River, coloured by cut (blue) and fill (red) between 2015 and 2020
SiteViewer 3D · SW Calgary ring road, cut (blue) and fill (red) between two LiDAR surveys

See it in action

Live SiteViewer demos. Each one opens in a phone or desktop browser, with cross-sections, measurements and tap-for-elevation. All are built from public open data.

Cut and fill map over the Elbow River valley embankment of the Calgary ring road New · change + volumes

Ring road earthwork, 2015 → 2020

SW Calgary ring road at the Elbow River and Glenmore Trail. Two open-data LiDAR surveys five years apart, compared cell by cell: cut/fill map, volumes by zone and by chainage, draw-an-area volumes, sections and 3D.

  • Cut / fill
  • Volumes
  • Sections
  • 3D
Aerial photo of the Trans-Canada Highway crossing the Carrot Creek fan in Banff National Park Photo + LiDAR

Trans-Canada Highway, Banff National Park

2025 aerial photo with 1 m LiDAR ground and surface models at Carrot Creek. Live cross-sections follow the highway; tap anywhere for ground and treetop elevations.

  • Orthophoto
  • Ground + surface
  • Live sections
3D terrain model of the Carrot Creek highway crossing with a section curtain 3D

The same site in 3D

The Banff viewer with its 3D mode: the terrain is built in your browser from the same elevation tiles as the map, so heights match the 2D readout exactly. Orbit, cut away along a section, switch ground and surface.

  • 3D terrain
  • Section curtains
  • Phone friendly

Demos use open data only (see credits below). On a real job the viewer uses your drone surface and your design or previous survey, and the link is unlisted and shared only with your team.

AR site view In field trials

See the design on the ground through your phone camera: toes and crests, cut and fill in stepped colours, and a live cut or fill number for wherever you point. Open the link in Chrome on an Android phone and tap Start. It uses the phone's GPS, then you point the phone along your shadow (or at the moon on night shift) to set the direction. No app, no setup and no extra gear.

  • Design in place
  • Live cut/fill
  • Android + Chrome

The demo is a made-up design on open LiDAR at Carrot Creek, Banff National Park. Away from the site you can look around it in the 3D preview. Good to a few metres, so it is a visual check and a way to show people, not for staking or layout.

Services

For construction, mining, oil & gas and public works projects.

Drone (RPAS) mapping

Orthophotos, surface models, contours, stockpile and earthwork volumes.

GNSS survey

Topographic, existing-conditions and as-built surveys.

Civil 3D drafting

Base plans, surfaces, profiles, sections and quantity take-offs.

Change and volume reports

Cut/fill between any two surfaces, by area, by zone or by chainage, with the checks written down.

SiteViewer web viewers

Cross-sections, volumes, 3D and GPS location on a phone, from one link.

Canadian datums

Processing to NAD83 / UTM (or NAD83(CSRS) when your spec calls for it), CGVD28 or CGVD2013 heights, stated on every sheet, with accuracy reports.

AR site view In field trials

See the design on the ground through your phone camera, with cut/fill colours, toes and crests, and a live cut/fill number for wherever you point. Open the link in Chrome on an Android phone and tap Start. It uses the phone's GPS, then you point the phone along your shadow (or at the moon on night shift) to set the direction. No setup and no extra hardware. Good to a few metres, so it is a visual check and a way to show people, not for staking or layout.

Legal and boundary surveys are referred to licensed land surveyors.

How it works

Three steps, whether we fly the site or you already have the data.

  1. Send it

    Drone photos, survey points or existing surfaces. Or we fly and survey the site for you.

  2. We process

    We check and align everything to your datum, then build the surfaces, volumes and drawings.

  3. You get

    A SiteViewer link that works on a phone (proprietary, easy-to-use site viewing tech), plus PDF sheets, a volume report and CAD/surface files.

About

Dene Survey Solutions is an Indigenous-owned business in Alberta, working from Calgary and Fort McMurray.

  • Over 40 years of combined civil, survey & drafting experience
  • Two Transport Canada Advanced RPAS pilots
  • ASET C.E.T. Recognized
  • Construction surveying and as-built drafting for construction, mining and oil & gas clients
  • Listed in the Indigenous Business Directory (Indigenous Services Canada)
  • NAICS 541370 · Surveying and Mapping (except Geophysical) Services

Contact

info@denesurveysolutions.ca

780-972-0067

Bids and tenders: bids@denesurveysolutions.ca

Capability statement PDF